Checkout the video below to make sure that you pick the right petcock!
For use with Pre-1975 Harley FL, FX, XL models with 3/8" NPT Petcock Bungs.
***Available with TWO Different Fuel Outlets (LEFT 90 & RIGHT 90)***
NOTE: Sifton does NOT offer a Brass 3/8" NPT Straight "Downward" Petcock.
Features:
- Listing is for ONE (1) HI-FLOW Petcock constructed of high grade FORGED BRASS.
- Petcocks come POLISHED with a Chrome Plated Lever to look good for years to come.
- Works with pre-1975 Harley Models FL, FX, XL with 3/8" NPT Petcock Bungs and most custom tanks with a 3/8" NPT Bung.
- Male 3/8" NPT thread.
- 3/8" barb accepts 3/8" ID hose (Some 5/16" ID Hose will work as well.)
- "R" (Reserve), "ON" and "OFF" just like OEM.
- The built-in filter allows for extra protection against debris entering your fuel system while still providing maximum flow.
- Please make sure that you have at least 2-1/2" from the bottom of the petcock bung and the nearest obstruction in your tank (Baffles etc).
- We also offer these Petcocks in Chrome as well as Female Internal 22mm thread for use with 1975 - 2006 models.
- Replaces HD Part # 62125-55B
When referencing the Fuel Outlet Orientation: PLEASE READ
- If the Lever is in the "OFF" position and pointed at you, "ON" is to the left and "R" (Reserve) is to your right.
- "Left 90" means that the Fuel Outlet is facing the LEFT.
- "Right 90" means that the Fuel Outlet is facing the RIGHT.
- "Straight" or "Downward" means that the Fuel Outlet is facing DOWN towards the ground.
If your Petcock is on the LEFT SIDE of the tank:
- "Left 90" means that the Fuel Outlet is facing the FRONT of the bike.
- "Right 90" means that the Fuel Outlet is facing the REAR of the bike.
If your Petcock is on the RIGHT SIDE of the tank:
- "Left 90" means that the Fuel Outlet is facing the REAR of the bike.
- "Right 90" means that the Fuel Outlet is facing the FRONT of the bike.
Dimensions:
- Overall Length = 3-5/8"
- Body OD = 1-1/4"
- Thread = Internal Female 22MM
The Length from the bottom of the threads to the top of the filter is 2-1/2" (Please check to make sure that this will fit in your tank.)
Finish:
- Polished Brass
- Chrome Plated Lever
Accommodates:
- Works with pre-1975 Harley FL, FX, XL Models with 3/8" NPT Petcock Bungs and most custom tanks with a 3/8" NPT Bung.
- Any tank with a 3/8" NPT bung and clearance for the filter inside the tank.
- A fuel hose with a 3/8" ID.
- ***Available with TWO Different Fuel Outlets (LEFT 90 & RIGHT 90)***
- FL 1965-1974
- FX 1971-1974
- XL 1955-1974
