S&S Cycle® Raw 560S Series Cam - Made in U.S.A.

Fits 1970-1977 Harley-Davidson Models with Big Twin Engine

Features:

• S&S CAMS

• S&S Cams are tested on the dyno, street and track before being offered to the public

• With hundreds of hours of testing on each cam, you know you are getting the best cam S&S can produce

• Made in the U.S.A.

• NOTE: Installer must check coil bind, valve-to-valve clearance, valve-to-piston clearance and cam lobe-to-case clearance.

• 450S CAM

• For lower compression motors up to 88" with compression up to 8.5:1

• Good low and mid-range torque

• Recommend hydraulic lifters

• 508 CAM

• S&S' best bolt-in cam

• Works well in all size motors up to 10:1 compression

• Quiet valve train

• Provides best power in low to mid-range

• 510 CAM

• S&S' best bolt-in cam

• Ideal for engines to 96" up to 10:1 compression

• No spring spacing required

• Works with stock pushrods, springs and hydraulic tappets

• 514 CAM

• For lower compression 84" to 93" motors, not more than 9:1

• Best response from 2500 to 5000 rpm

• Recommend solid or performance aftermarket hydraulic lifters

• 520 CAM

Finish:

• Raw

Fitment:

• 1977 Harley-Davidson 1200 Low Rider FXS

• 1974-1977 Harley-Davidson 1200 Super Glide FXE

• 1971-1977 Harley-Davidson 1200 Super Glide FX

• 1970-1977 Harley-Davidson Electra Glide FL

• 1970-1977 Harley-Davidson 1200 Electra Glide FLH