S&S Cycle® Raw 450 Series Cam - Made in U.S.A.
Fits 1948-1969 Harley-Davidson Models with Big Twin Engine
Features:
-
S&S CAMS
-
S&S Cams are tested on the dyno, street and track before being offered to the public
-
With hundreds of hours of testing on each cam, you know you are getting the best cam S&S can produce
-
Made in the U.S.A.
-
NOTE: Installer must check coil bind, valve-to-valve clearance, valve-to-piston clearance and cam lobe-to-case clearance.
-
450S CAM
-
For lower compression motors up to 88" with compression up to 8.5:1
-
Good low and mid-range torque
-
Recommend hydraulic lifters
-
508 CAM
-
S&S' best bolt-in cam
-
Works well in all size motors up to 10:1 compression
-
Quiet valve train
-
Provides best power in low to mid-range
-
510 CAM
-
S&S' best bolt-in cam
-
Ideal for engines to 96" up to 10:1 compression
-
No spring spacing required
-
Works with stock pushrods, springs and hydraulic tappets
-
514 CAM
-
For lower compression 84" to 93" motors, not more than 9:1
-
Best response from 2500 to 5000 rpm
-
Recommend solid or performance aftermarket hydraulic lifters
-
520 CAM
Finish:
-
Raw
Fitment:
-
1966-1969 Harley-Davidson Electra Glide FL
-
1966-1969 Harley-Davidson 1200 Electra Glide FLH
-
1965 Harley-Davidson 1200 Electra Glide FLH
-
1965 Harley-Davidson Electra Glide FL
-
1958-1964 Harley-Davidson Duo Glide FL
-
1958-1964 Harley-Davidson Duo Glide FLH
-
1949-1957 Harley-Davidson Hydra Glide EL
-
1949-1951, 1953-1957 Harley-Davidson Hydra Glide FL
-
1948 Harley-Davidson FL
