Legend Suspension® 39mm AXEO39TS High-Performance Front Suspension System +2" Lifted

1991-2005 Harley Dyna, 1988-2000 FXR & 1988-2021 Sportster Models (See Fitment Below)

NOTE: Requires the use of aftermarket +2" (26.25") upper fork tubes.

Features:

• Innovative through shaft design is first of its kind in front fork application, not like others offering spring drop in or nitrogen
• Easily installs in few simple steps
• Includes TWO mono-tube, damper cartridges
• Unique through-shaft technology so there is no pressure at end of stroke
• Utilizes a two-stage management system controlling fluid flow and high pressure
• Compression and rebound flow rate is managed via high-flow damper piston and deflective disc set
• Secondary high pressure control system, using precision load rated wave springs, allowing spike over pressure to bypass, protecting the deflective disc’s precision valve opening limits
• Through shaft eliminates the rod pressure in-and-out issues plus piston rod is always in fluid
• Two precision linear bearings support both sides of the rod and piston assembly
• Proprietary performance main spring
• Machined 303 stainless threaded preload adjuster
• Increased pre-load range allows fine tuning for various riding styles and weights
• 5” of travel
• Ride quality is smooth and controlled
• Improves stability, cornering and traction
• Eliminates front-end dive during aggressive braking and maneuvering
• Firm feel for high-speed sweeping turns
• Eliminates bottoming out on large bumps or potholes
• Reduces dragging pegs
• Designed for optimum performance with Legend rear suspension system
• Maintains stock hydraulic bump stop
• Lifetime Warranty
• Made by hand in Sturgis, SD USA
• NOTE: Requires the use of aftermarket +2" (26.25") upper fork tubes.
• PRO TIP: Legend DOES NOT include fork seals, bushings or recommended 20W oil, so make sure to pick some up before you tear the bike down.

Dimensions:

• Fork Tube Diameter - 39mm

Fitment:

• NOTE: Requires the use of aftermarket +2" (26.25") upper fork tubes.
• Additional Parts required for FXR and XL 1986-1990 applications (Harley Davidson P/N 45361-90)
• Due to the nature of the design, this front end kit will raise the overall ride height of the motorcycle.
• 1991-2005 Harley Dyna (Does not fit 2000-2003 FXDX Dyna Convertible. Does not fit 2001-2003 FXDXT Dyna Super Glide T-Sport)
• 1988-2000 FXR
• 1988-2021 Sportster (Does not fit 1996-2003 XL 1200 Sport)