Dynojet Power Commander 6 Fuel Injection Tuning Module/Plug-In Performance Tuner

For 2010-2012 Ducati Hypermotard 1100 EVO/EVO SP

What's NEW for the Power Commander 6?

Developed to simplify the user experience, PC6 makes choosing and tuning a map easier for the end user. 

Description:

The Power Commander 6 fuel injection tuning device allows you to optimize your fuel and timing curve (where applicable) giving you the confidence to roam freely. With fine tune adjustability and multiple inputs, the Power Commander 6 will keep your vehicle running at its full potential letting you concentrate on the journey ahead.

Featuring a plug-and-play setup, Power Commander 6 can be installed discreetly underneath your seat, cowl, dash or other location ensuring your ride looks as good as it runs. Removing the device reverts your vehicle completely back to stock. With the ability to store and switch between two maps on-the-fly (via the map switch accessory) and connect to various Power Commander accessories such as the Autotune, Quickshifter or POD-300, the Power Commander 6 gives you features and functions that provide you with the ultimate ride.

All PC6 models have an end-user adjustment of +/- 15% in the FUEL table and +/- 8% in the timing table (if applicable). This adjustment is on top of the values that are in the BASE map loaded to the device. This BASE map can be any of the available maps from the Dynojet website, or those you may have received from a third party. If you should need more adjustment, please contact your local Authorized Dynojet Dealer.

Features:

• Compact design for discrete placement & easy uninstallation to revert to stock settings

• Easily change & upgrade tunes as you upgrade parts

• Comes with Power Core software that connects dyno runs with our EFI Tuning Devices to unlock your ride’s potential

• Pair with other Power Commander accessories like the Autotune, Quickshifter or POD-300

• Analog input allows you to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature

• Easily connects to your computer via USB

• Each cylinder can be mapped individually and for each gear, giving riders more granular control

• One year warranty

• Proudly made in the USA

NOTE:

• Unlike the Power Commander 5 (PCV), the PC6 will not work with ignition modules, Secondary Fuel Modules (SFM), and does not have the accelerator pump feature.

• Base map values are not shown in the Tuning Software but usually allows for +/- 15% fuel adjustment and +/- 8% ignition adjustment (with ignition capable units).

Fitment:

• 2010-2011 Ducati Hypermotard 1100 EVO

• 2010-2012 Ducati Hypermotard 1100 EVO SP

C.A.R.B. Disclosure: 

• The California Air Resources Board (CARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle.