null

Custom Dynamics® Magic Strobes™ Plug-N-Play Brake Light Flasher with 10 Strobe Patterns - Fits 2014-2019 Harley Touring Models

$109.95
(No reviews yet) Write a Review
SKU:
MAGIC-STROBE-RSG

Custom Dynamics® Magic Strobes™ Brake Light Flasher with 10 Strobe Patterns

Riders can easily plug Magic Strobes™ into the stock harness and select from 10 flash & strobe patterns by simply spinning the built-in dial. Order the Custom Dynamics Magic Strobe for your 2014-2019 Harley Touring motorcycle.

Features:

  • Applies brake flash/strobe patterns to Custom Dynamics® Rear 1157 LED bullet style run, brake, turn signals & LED Squareback or Laydown rear center taillight (does not flash Tour-Pak). 
  • Unit also allows Fillerz® to flash/strobe when functioning as Run/Brake/Turn. 
  • NOTE: To provide clear signals, normal turn signal flash will automatically override the brake flash/strobe when simultaneously braking and turning.
  • Over-current/thermal/short circuit/reverse wiring protection.
  • 84W, 12V system.
  • Sealed weather-tight case.
  • WORKS WITH LED's ONLY
  • Plug and play installation for 2014-2019 Harley-Davidson Touring Models with LED Brake Lights (See Fitment Below.) 
  • This Custom Dynamics Magic Strobe is not compatible with Harley-Davidson® aftermarket dual intensity Tri-Bar or Tour-Pak.
  • 5 Year Warranty

Patterns:

  • Pattern 0: Four Flashes then Solid  
  • Pattern 1: Four Flashes, Solid for 3 Seconds, Repeat 
  • Pattern 2: Seven Flashes then Solid 
  • Pattern 3: Seven Flashes, Solid for 3 Seconds, Repeat 
  • Pattern 4: Quad Strobe, then Solid for 1 Second then Quad Strobe 
  • Pattern 5: Quad Strobe, Solid for 1 Second, then Quad Strobe, Solid for 3 Seconds, Repeat
  • Pattern 6: Blaster X Pattern for 6 Seconds, then Solid
  • Pattern 7: Custom LED Blaster X Cycle, Repeat 
  • Pattern 8: Max Strobe 4 Seconds, Solid 
  • Pattern 9: No Pattern

Finish:

  • Black

Dimensions:

  • Length              -           4.2"
  • Width               -           1.4”
  • Height              -           .6"

Fitment:

  • Plug and play installation on 2014-2019 Street Glide®, Street Glide® Special, Road Glide®, Road Glide® Special, Road King® Special applies brake flash/strobe patterns to Custom Dynamics® Rear 1157 LED bullet style run, brake, and turn signals. This unit is not compatible with Harley-Davidson® aftermarket dual intensity Tri-Bar.
  • Plug and play installation on 2014-2019 Electra Glide® Ultra Classic®/Lo, Ultra Limited/Lo, Road Glide® Ultra and 2016 Road Glide Ultra CVO™ and 2016-2019 Limited CVO™ applies brake flash/strobe patterns to rear center LED taillight (does not flash Tour-Pak). Unit also allows Fillerz® to flash/strobe when functioning as Run/Brake/Turn. 
  • Although this device has been designed to significantly increase your braking visibility, flash/strobe patterns may not be street legal.
  • *Requires the use of LED bulbs in the rear. 
  • Must be used with Low Power Current Draw LEDs such as Custom Dynamics® LEDs. The use of Incandescent or High Power LEDs (greater than 300ma) will cause the unit to fail.