Belt-to-Chain Conversion Chrome 51 Tooth Rear Sprocket - For 530x120 Chain
Fits 2000+ Harley Sportster XL models while maintaining stock gearing ratio
Features:
- 51 tooth rear sprocket with a 9.8mm offset.
- This sprocket works with a 530 x 120 Chain.
- Designed to fit 2000+ Harley Sportster XL models while maintaining stock gearing ratio.
- We also offer 48 Tooth rear sprockets as well as full conversion kits with front sprocket and chains.
NOTE: These are made for use in a stock Sportster frame or a frame or hardtail which uses stock spacing (such as hardtails which use the stock rear wheel assembly, brake, and axle spacers). If the frame you are using is a different axle plate spacing (width) or you are using a non-stock wheel this may affect the rear sprocket alignment. This is for use with a stock width wheel, and is not for a wide tire conversion.
NOTE: Remember a larger sprocket on rear means more torque (geared down) and a larger front sprocket means higher gears, more top end.
NOTE: Because of tight clearance when using stock muffler mount or stock passenger peg mounts do not use an O-ring chain because the additional width may cause chain to wear at these components on deceleration.
Finish:
- Chrome
Fitment:
- Designed to fit 2000+ Harley Sportster XL models while maintaining stock gearing ratio.