Checkout the video below to make sure that you pick the right petcock!

For use with Pre-1975 Harley FL, FX, XL models with 3/8" NPT Petcock Bungs.

***Available with Three Different Fuel Outlets (LEFT 90 - RIGHT 90 - STRAIGHT "DOWNWARD")***

Replaces HD Part # 62125-55B

• Listing is for ONE (1) HI-FLOW Filtered Petcock constructed of high grade FORGED BRASS.

• Petcocks are then Chrome Plated to look good for years to come (Also available in Polished Brass.)

• Works with pre-1975 Harley Models FL, FX, XL with 3/8" NPT Petcock Bungs and most custom tanks with a 3/8" NPT Bung.

• Male 3/8" NPT thread.

• 3/8" barb accepts 3/8" ID hose (Some 5/16" ID Hose will work as well.)

• "R" (Reserve), "ON" and "OFF" just like OEM.

• The built-in filter allows for extra protection against debris entering your fuel system while still providing maximum flow.

• Please make sure that you have at least 2-1/2" from the bottom of the petcock bung and the nearest obstruction in your tank (Baffles etc).

• We also offer these Petcocks in POLISHED BRASS.

When referencing the Fuel Outlet Orientation: PLEASE READ (VIDEO BELOW) 

If the Lever is in the "OFF" position and pointed at you, "ON" is to the left and "R" (Reserve) is to your right.

"Left 90" means that the Fuel Outlet is facing the LEFT.

"Right 90" means that the Fuel Outlet is facing the RIGHT.

"Straight" or "Downward" means that the Fuel Outlet is facing DOWN towards the ground.

If your Petcock is on the LEFT SIDE of the tank:

"Left 90" means that the Fuel Outlet is facing the FRONT of the bike.

"Right 90" means that the Fuel Outlet is facing the REAR of the bike.

If your Petcock is on the RIGHT SIDE of the tank:

"Left 90" means that the Fuel Outlet is facing the REAR of the bike.

"Right 90" means that the Fuel Outlet is facing the FRONT of the bike.

Dimensions:

Overall Length    =              3-5/8" 

"Face" OD          =              1-1/4"

Thread              =              Internal Female 22MM

The Length from the bottom of the threads to the top of the filter is 2-1/2" (Please check to make sure that this will fit in your tank.) 

Finish:

Chrome

Accommodates: 

Works with pre-1975 Harley FL, FX, XL Models with 3/8" NPT Petcock Bungs and most custom tanks with a 3/8" NPT Bung.

Any tank with a 3/8" NPT bung and clearance for the filter inside the tank.

A fuel hose with a 3/8" ID. 

***Available with Three Different Fuel Outlets (LEFT 90 - RIGHT 90 - STRAIGHT "DOWNWARD")***

FL 1965-1974
FX 1971-1974
XL 1955-1974